Diagnostic Cable TEXA AM15 – YANMAR (BY Series)
TEXA AM15 is a terminal cable designed for diagnostics of Yanmar motors of the 4BY2, 4BY3, 6BY2 and 6BY3 series. The cable enables diagnostic communication with the engine control units in accordance with the manufacturer’s procedures, in the MARINE environment.
Note: The AM15 cable does not work alone and must be used in conjunction with the TEXA AM01 base cable.
Supported motors
-
YANMAR 4BY2
-
YANMAR 4BY3
-
YANMAR 6BY2
-
YANMAR 6BY3
Intended use
The TEXA AM15 cable is used for:
-
electronic diagnostics of YANMAR motors – BY series,
-
communication with the ECU via a dedicated diagnostic socket,
-
work as a dedicated terminal cable in the TEXA MARINE system.
Diagnostic features
In combination with the AM01 base cable, the TEXA interface and the IDC6 MARINE software, the AM15 cable enables:
-
reading and clearing fault codes,
-
preview of real parameters (Live Data),
-
identification of controllers and systems,
-
monitoring engine operation,
-
implementation of service procedures available for the BY series.
The range of functions depends on the specific engine model and support in the TEXA software.
Power supply – important information
External power supply required
To run the diagnostic interface and perform diagnostics:
-
the AM01 cable must be connected to the engine/vehicle battery using power cables (crocodile clips),
-
If there is no battery – use an external power source.
Compatibility
-
Engine Brand: YANMAR
-
Series: 4BY2, 4BY3, 6BY2, 6BY3
-
Environment: MARINE
-
Software: TEXA IDC6 MARINE
-
Interfaces: TEXA Navigator TXB 2, TXT, TXT MULTIHUB
-
Base Cable Required: TEXA AM01
-
Cable Designation: AM15
Application
-
professional YANMAR engine services,
-
Marine workshops operating BY series units,
-
vessel diagnostic centers,
-
Mobile Marine services.
