Electronics kit – dynos for shock absorbers

ShockAnalyzer – electronics for shock absorber analysis

Features

• Real-time data acquisition
  – cooperation with any computer

• Recording of shock absorber operating parameters:

  • Movement speed

  • damping force,

  • Temperature

• Multi-Speed Mode
  – Inverter Controlled Motor (VFD)
  – possibility of recording the characteristics of the shock absorber at different speeds

• Multi-Test
  – the ability to save multiple tests
  – loading previously saved measurements for analysis

What does the ShockAnalyzer electronic kit include?

• ShockAnalyzer Data Acquisition Unit (ShockAnalyzer DAQ)

• 100 mm potentiometer with extension cable

• Force Sensor (Load Cell) 1000 kg

• 3-pin cable to inverter (VFD)

• Power cord

• USB-to-RS232 adapter with FTDI chip

• Software media (CD)

⚠️ Note:
The machine/test bench is not included in the price of the electronic kit.

Technical specifications

• Power supply: 85-230 V AC, 50/60 Hz

• Force Sensor Input (Load Cell):

  • 2 mV/V and 3 mV/V sensors recommended

• Data transmission:

  • RS232C 115200 baud (DB9 connector)

  • dedicated COM-to-USB cable included

Roller speed input (CN2)

• Sensor Type: Active Hall Sensor
  (no external magnets required)

• Input Type: Logic Level (Active High State)

• Maximum frequency: 18 kHz
  (equivalent to 6700 rpm at 180 teeth)

• Maximum cable length: 10m

• (Optional) RUN/STOP input (switch)

• Motor RPM input:

  • capacitive type

  • reading of high-voltage pulses from ignition cables

• Display:

  • LCD 16×2 characters